DiloGroup to show complete textile production line at ITMA low melt polyester fiber
You are here: HOME » NEWS » DiloGroup to show complete textile production line at ITMA low melt polyester fiber

DiloGroup to show complete textile production line at ITMA low melt polyester fiber

Views: 4     Author: Site Editor     Publish Time: 2019-05-08      Origin: Site

Pic: DiloGroup
Pic: DiloGroup

DiloGroup, a leading textile machinery group, is set to exhibit a complete operating textile production line at ITMA 2019, in hall 5, booth B201. The line will show improvements and modifications as well as innovations in numerous machine design-engineering aspects. The textile and garment technology expo will be held from June 20-26, 2019, in Barcelona.

The complete technological process starting with fibre preparation via card feeding, to precise web forming and the new Hyperpunch Hα needling will be shown at the expo. Elements of industry 4.0 have been incorporated to design the assisting operating system diloline 4.0, DiloGroup said in a press release.

In the fibre preparation phase with DiloTemafa components, the Baltromix Pro will show a faster blend changeover which is a prerequisite for even higher throughput. An exact control of the filling level avoids idling or over-filling by feeding fibre bales with the aid of a ‘bale timer’. The sensor module DI-LoWatt assures fibre transport with a minimum of air and thus saves energy.

The current universal card feeder VRS-P Vibration Chute is supplemented by a fine opening stage to further improve feeding quality. After the VectorQuadroCard, the latest version of our high speed crosslapper HyperLayer will be included which allows highest throughput at small to medium layering widths and which is especially suited for hydroentanglement lines.

The advantages of the elliptical needle beam kinematics of Hyperpunch technology is even better used in the Hyperpunch Hα loom as a very economic version of the classical Hyperpunch technique. The needleloom on show – DI-LOOM OD-II SLHαV – is equipped with the new needle pattern 6000X to give a very homogeneous stitching distribution. An automatic starting-aid ‘smart-start’ for the card with automatic threading to crosslapper and needleloom reduces the number of manual interventions.

In the field of textile additive manufacturing, the 3D-Lofter will offer further chances of fibre savings for needlefelts used in the automotive and other applications because topologically distributed fibre masses can be positioned in the felt where needed by so called individual webforming spots.

Diloline 4.0 includes a wide variety of smart manufacturing actions in collaboration with Siemens which all aim at further simplifying operation, increasing transparency in web forming and consolidation thereby increasing efficiency. Production data are stored, documented and compared. An alarm monitor indicates disturbances. A production analysis documents the reasons for standstill times. This data can be used to avoid disturbances. Numerous information modules can be recalled via mobile apps and cloud data (mindSpheres). All these methods to control the machines and to generate production data will be helpful to further secure the complex functions within the production system independently of personnel and shift.